TEROSON® EP 5010 TR is a 2-part epoxy adhesive with Part A in dark gray and Part B in white or light gray. It is specifically designed for rebuilding metal surfaces, such as vehicle shells or car bodies made of steel or aluminum. Typically used as a lead-free alternative to tin solder, it fills and smooths out damage. This adhesive is perfect for final modeling of pulled dents in hard-to-reach areas or welded joints. It contains no isocyanates, silicones or lead, and it does not shrink or sag. It is excellent for grinding and has good reshaping properties. Its easy application saves time, as it eliminates the need to remove airbags, plastic components, fabrics, and the fuel tank or inlet. The mixed compound has a ~90-minute processing time (23°C/73°F, 50% rh). Full cure occurs at room temperature in 24 hours; curing can be accelerated via infrared heat at 60°C (140°F) for 1 hour. For application, please use a pneumatic or manual, dual cartridge dispenser, e.g. LOCTITE HD14 Handheld Pneumatic Dual Cartridge Dispenser (200ml, item 2693824) or LOCTITE HD14 Handheld Manual Dual Cartridge Dispenser (200ml, item 2693822). Before application, surface pretreatment with TEROSON VR 10 is recommended.

TEROSON® EP 5010 TR is a 2-part epoxy adhesive with Part A in dark gray and Part B in white or light gray. It is specifically designed for rebuilding metal surfaces, such as vehicle shells or car bodies made of steel or aluminum. Typically used as a lead-free alternative to tin solder, it fills and smooths out damage. This adhesive is perfect for final modeling of pulled dents in hard-to-reach areas or welded joints. It contains no isocyanates, silicones or lead, and it does not shrink or sag. It is excellent for grinding and has good reshaping properties. Its easy application saves time, as it eliminates the need to remove airbags, plastic components, fabrics, and the fuel tank or inlet. The mixed compound has a ~90-minute processing time (23°C/73°F, 50% rh). Full cure occurs at room temperature in 24 hours; curing can be accelerated via infrared heat at 60°C (140°F) for 1 hour. For application, please use a pneumatic or manual, dual cartridge dispenser, e.g. LOCTITE HD14 Handheld Pneumatic Dual Cartridge Dispenser (200ml, item 2693824) or LOCTITE HD14 Handheld Manual Dual Cartridge Dispenser (200ml, item 2693822). Before application, surface pretreatment with TEROSON VR 10 is recommended.